Technical Information
System description
The PeelJet® nozzle traversing module is installed on the truck's front plate and controls the high pressure nozzle head movement.
The PeelJet® power pack is installed on the loading platform of the truck in a sound insulated container, which incorporates all of the other PeelJet® components.
Water supply and waste water management is effected by VacuFlex direct suction trailer, towed by the carrier truck.
General technical data
| Max. theor. working width |
approx. 2.200 mm |
| Max. removal rate of contamination (depending on surface and contamination) |
~ 800 m2/h |
| Min. ambient temperature |
+ 2 °C |
| Max. working pressure |
2.500 bar
36.000 psi |
| Max. water consumption |
29 l/min
~ 1,8 m3/h |
| Specific water consumption |
2,3 - 3,5 l/m2 |
| Fuel consumption |
~ 48 l/h |
| Specific fuel consumption |
5 - 8 l/100 m2 |
PeelJet® application
- increase of friction level on asphalt, concrete, AntiSkid®, grooved or ungrooved, without damaging surface layer
- removal of redundant paint markings from asphalt, concrete, AntiSkid® surfaces, without damaging surface layer
- cleaning of under-floor lights without damaging the seals
- oil spill removal
- clearing of joints on concrete surfaces (optional equipment required)
|
Technical Information
